Presentation Archive

Practical Considerations for Shear Wall Connections and Details in Light-Frame Wood Structures

April 19, 2023 | National Online Event

• Practical Considerations for Shear Wall Connections and Details in Light-Frame Wood Structures  – Ashley Cagle & Terry Malone, WoodWorks

Mass Timber Bootcamp at the Mass Timber Conference

March 27, 2023 | National In-Person Event

• Becoming a Mass Timber Design Expert  – Chelsea Drenick and Jeff Peters, WoodWorks
• Structural Design: Member Sizing, Optimized Grids, Connections and Lateral Load Connections – Anthony Harvey and Mike Romanowski, WoodWorks
• Acoustics, Floor Vibration, MEP Integration, Enclosure and Moisture Protection – Jessica Scarlett, Mark Barlett, and Jason Bahr, WoodWorks

Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?

March 21 & 23, 2023 | Regional In-Person & Online Event (GA, MS)

• Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?  – Laura Cullen, WoodWorks

Exploring Wood Buildings: Innovative Products and New Code Provisions

March 14 & 16, 2023 | Regional In-Person & Online Event (NC, SC, TN)

• Exploring Wood Buildings: Innovative Products and New Code Provisions  – Jessica Scarlett, WoodWorks

Mass Timber Warehouses

March 8, 2023 | National Online Event

• The Boulder/Denver Market Project Summary  – Hunter Jorgensen, Sugarloaf Building
• Building Southfield Park 35 Warehouse in Dallas with CLT Wall Panels – Joe Rahn, Clayco
• Mass Timber Expanding to the Industrial Sector – Melissa Kroskey, WoodWorks

Tall Mass Timber in Portland: An Insider’s Look at Prescriptive Design

February 28, 2023 | WIN Online Event

• Tall Mass Timber in Portland: An Insider’s Look at Prescriptive Design  – Kate Carrigg, Woodworks, David Burnett, Access Architecture and Shirly Chalupa, DCI Engineers
• Tall Mass Timber in Portland: An Insider’s Look at Prescriptive Type IV-C Design – Brendan Sanchez and David Burnett, Access Architecture and Shirley Chalupa, Justin Fenton and Kevin Miller, DCI Engineers

Building Sustainably: Wood’s Role in Healthy Forests and Healthy Buildings

February 28 & March 2, 2023 | Regional In-Person & Online Event (VA, DC, DE, MD, WV)

•  Building Sustainably: Wood’s Role in Healthy Forests and Healthy Buildings  – John O’Donald II, Woodworks

Early Design Decisions: Priming Mass Timber Projects for Success 

February 28 & March 2, 2023 | Regional In-Person & Online Event (KS, AR, MO, OK)

•  Early Design Decisions: Priming Mass Timber Projects for Success  – Jason Bahr, Woodworks

A New Path Forward for Tall Wood Construction:Code Provisions and Design Steps 

February 21 & 23, 2023 | Regional Online Event (TX)

•  A New Path Forward for Tall Wood Construction:Code Provisions and Design Steps  – Mark Bartlett, Woodworks

Designing and Engineering Mass Timber Buildings in California

February 16, 2023 | Regional Online Event (West)

• New Code Provisions for Tall Timber Structures in California – Chelsea Drenick, Woodworks
• CLT Shear Wall and DiaphragmDesign in California – Mike Romanowski, WoodWorks

Detailing Mass Timber Structures to Minimize Impacts of Differential Movements

February 9, 2023 | National Online Event

• Detailing Mass Timber Structures to Minimize Impacts of Differential Movements – Jason Bahr, Woodworks
• From Design to Construction, How to Manage & Minimize Differential Movement in Tall Mass Timber Structures – Josephine Racine, Fast+Epp
• C. Gerald Lucey Building – Sarah Tarbet, Jones Architecture and Jonathan Rossini, BOND Building Construction

Shrinkage and Vertical Movements in Multi-Story Wood-Frame Structures

February 7, 2023 | National Online Event

• Accommodating Shrinkage in Multi-Story Wood-Frame Structure – Mark Bartlett & Laura Cullen, Woodworks
• Building Enclosure Design and Detailing to Account for Wood Shrinkage – Tammy Siliznoff, RDH Building Science

Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?

January 19, 2023 | Regional Online Event

• Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project? – Momo Sun, Woodworks

Type III Construction for Multi-Family:  Best Practices and Detailing for Success

January 11, 2023 | National Online Event

• Type III Construction for Multi-Family:  Best Practices and Detailing for Success – Jonathan Hall, BD+C & Homes, GGLO
• Type III Construction for Multi-Family:  Best Practices and Detailing for Success – Kate Carrigg & Jeff Peters, Woodworks

Mass Timber Shafts and Shaft Wall Solutions for Mass Timber Buildings

December 15, 2022 | National Online Event

• Mass Timber Shafts and Shaft Wall Solutions for Mass Timber Buildings – Anthony Harvey, WoodWorks
• Mass Timber Shafts and Shaft Wall Solutions for Mass Timber Buildings – Jeff Spiritos, Spiritos Properties,  Andrew Ruff, Gray Organschi and  Michael Scancarello, Odeh Engineers
• Mass Timber Shafts and Shaft Wall Solutions for Mass Timber Buildings –  Alyson Blair, Holmes, Matt Harwood, Holmes and Chris Grosse, LEVER Architecture

Light Wood-Frame Shaft Wall Detailing for Code Compliance and Constructability

December 13, 2022 | National Online Event

• Light Wood-Frame Shaft Wall Detailing for Code Compliance and Constructability – Jason Bahr, WoodWorks
• Light Wood-Frame Shaft Wall Detailing for Code Compliance and Constructability – Anisa Awad and Thuy Fontelera, Element Structural Engineers
• Light Wood-Frame Shaft Wall Detailing for Code Compliance and Constructability –  Nick Diggins, Mosaic Architecture and  Aubrey Yerger, Morrison-Maierle

Designing and Building with Mass Timber: Design, Planning and Performance

December 9, 2022 | Regional Online Event (CA-North, NV, UT)

• Designing and Building with Mass Timber: Design, Planning and Performance – Chelsea Drenick & Brandon Brooks, WoodWorks

Wood Buildings: Sustainable Forestry, Biophilic Design and Carbon Footprint

December 8, 2022 | Regional Online Event (West)

• Wood Buildings: Sustainable Forestry, Biophilic Design and Carbon Footprint – Mike Romanowski, WoodWorks
• Carbon Footprint of Wood Products & Buildings – Kate Carrigg, WoodWorks

A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps

December 6, 2022 | Regional Online & In-Person Event (Atlanta, GA)

• A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps – Laura Cullen, WoodWorks

Designing and Building with Mass Timber: Design, Planning and Performance

December 2, 2022 | Regional Online Event (NC, SC, TN)

• Designing and Building with Mass Timber: Design, Planning and Performance – Jessica Scarlett, WoodWorks

Early Design Decisions: Priming Mass Timber Projects for Success

December 1, 2022 | Regional Online & In-Person Event (Fishers, IN)

• Early Design Decisions: Priming Mass Timber Projects for Success – Anthony Harvey, WoodWorks

Taking the Guesswork out of Mixed-Use Building Analysis

November 30, 2022 | Regional Online & In-Person Event (Waltham, MA)

• Taking the Guesswork out of Mixed-Use Building Analysis – Marc Rivard, WoodWorks

Exploring Mass Timber: Building Insurance & Tall Wood

November 29, 2022 | Regional Online & In-Person Event (Pasadena, TX)

• Exploring Mass Timber: Building Insurance & Tall Wood – Mark Bartlett, WoodWorks

Mid-Rise Design & Detailing: Optimizing Size, Maximizing Value

November 16, 2022 | Regional Online & In-Person Event (Richmond, VA)

• Mid-Rise Design & Detailing: Optimizing Size, Maximizing Value – Marc Rivard, WoodWorks

Fire and Structural Analysis for Mass Timber Buildings

November 9, 2022 | Online National Event

• Fire and Structural Analysis for Mass Timber Buildings – Jessica Scarlett, Scott Breneman & Ricky McLain, WoodWorks

Structural Engineering of Mid-Rise Wood-Frame Construction

November 2, 2022 | NCSEA Summit – Chicago, IL

• Structural Engineering of Mid-Rise Wood-Frame Construction – Anthony Harvey, WoodWorks

Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?

October 27, 2022 | Regional Online & In-Person Event – Raleigh, NC

• Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project? – Jessica Scarlett, WoodWorks

Mitigating Shrinkage and Differential Movement in Wood Construction

October 25 & 27, 2022 | Regional Online & In-Person Event – Richmond Heights, MO

• Mitigating Shrinkage and Differential Movement in Wood Construction – Jason Bahr, WoodWorks

The Construction Phase Firsthand: Best Practices, Innovations & Training

October 7, 2022 | Regional Event – Portland, OR

• Adding Value: Commonly Overlooked Areas for Wood Framing & Mass Timber – Kate Carrigg, WoodWorks
• Frame it Right! Engineered Wood Use in Big Buildings – Larry Oenning, APA

Designing and Building with Mass Timber: Design, Planning and Performance

September 30, 2022 | Regional Online Event

• Designing and Building with Mass Timber: Design, Planning and Performance – John O’Donald II, WoodWorks
• Mass Timber Construction Management – Brandon Brooks, WoodWorks

DCAMM Site Tour: A Firsthand Look at Mass Timber Construction

September 29, 2022 | Regional Tour (Brockton, MA) 

• DCAMM Site Tour: A Firsthand Look at Mass Timber Construction – Marc Perras, Jones Architecture

Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?

September 27, 2022 | Regional In-Person (Austin, TX) and Online Event

• Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project? – Mark Bartlett, WoodWorks

Wood Construction in New England: A Firsthand Look

September 22, 2022 | Regional Online & In-Person (Brunswick, ME) 

• Wood Construction in New England: A Firsthand Look – Marc Rivard, WoodWorks

Common Challenges in Light Wood-Frame Gravity Structural Design

September 15, 2022 | National Online Event

• Common Challenges in Light Wood-Frame Gravity Structural Design – Doug Stemle & Fae Garstang, Schaefer
• Floor Framing Considerations – Mike Romanowski, WoodWorks

Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?

September 7, 2022 | Regional In-Person (Missoula, MT) and Online Event

• Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project? – David Hanley, WoodWorks

Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood

August 30, 2022 | Regional Online Event (NY, NJ, PA)

• Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood – Momo Sun, WoodWorks
• How to Specify Engineered Wood Products – Bob Kuserk, APA

Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood

August 18, 2022 | Regional Online Event (CA-South, AZ, NM)

• Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood – Mike Romanowski, WoodWorks
• How to Specify Engineered Wood Products – Aleeta Dene, APA

Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood

August 17, 2022 | Regional Online Event (Pacific Northwest)

• Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood – Mike Romanowski, WoodWorks
• How to Specify Engineered Wood Products – Larry Oenning, APA

Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood

August 16, 2022 | Regional Online Event (CO, MT, NE, ND, SD, WY)

• Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood – David Hanley, WoodWorks
• How to Specify Engineered Wood Products – Ron Nuttall, APA

General Contractor’s Guide to Mass Timber Project Estimation 

August 12, 2022 | National Online Event

• General Contractor’s Guide to Mass Timber Project Estimation – Jeff Chan, Seagate Mass Timber, Steve Whitcraft, Turner Construction Company and Brandon Brooks, WoodWorks

Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood

August 9, 2022 | Regional Online Event (TX)

• Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood – Mark Bartlett, WoodWorks
• How to Specify Engineered Wood Products – Aleeta Deene, APA

Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood

July 27, 2022 | Regional Online Event (NC, SC, TN)

• Mid-Rise Design: Optimizing Size, Framing Efficiently with Engineered Wood – Jessica Scarlett, WoodWorks
• How to Specify Engineered Wood Products – Warren Hamrick, APA

Protective Design in Mass Timber Construction

July 27, 2022 | National Online Event

• Protective Design in Mass Timber Construction – Karen Gesa, WoodWorks & Mark Weaver, Karagozian & Case

Designing and Building with Mass Timber: Design, Planning and Performance

July 22, 2022 | Regional Online Event

• Designing and Building with Mass Timber: Design, Planning and Performance – Anthony Harvey, WoodWorks
• Mass Timber Construction Management – Brandon Brooks, WoodWorks

Early Design Decisions: Priming Mass Timber Projects for Success

July 19, 2022 | Regional Online Seminar (Denver, CO)

• Early Design Decisions: Priming Mass Timber Projects for Success – David Hanley, WoodWorks

Offsite Construction in Wood: Reinventing the Role of the Design Professional

July 13, 2022 | National Online Webinar

• Offsite Construction in Wood: Reinventing the Role of the Design Professional – Ryan E. Smith, University of Arizona, Ivan Rupnik, Northeastern University, Tyler Schmetterer, MOD X

2022 AIA National Convention, WoodWorks Education Lab

June 23-24, 2022 | Chicago, IL

• Mass Timber High Rises: Lessons Learned – John Mitchell, Hartshorne Plunkard Architecture and Ricky McLain, WoodWorks
•  Interior Wall & Floor Assemblies in Multi-family: Design & Details – Ashley Cagle, Bruce Lindsey and Jason Bahr, WoodWorks
• Carbon & Cost: Evaluating the Impacts of Different Structural Systems – Greg Kingsley, KL&A Engineers and Builders and Ashley Cagle, WoodWorks
• Light-frame Wood Innovation: Six-over-Two Podium Construction – Adam Hostetler, Works Progress Architecture and Alex Davis, PCS Structural Solutions
• Mass Timber at Apex Headquarters: A New Benchmark for Sustainability – Alastair Reilly, William McDonough + Partners
• Mass Timber in Multi-Family Housing, is it a Good Fit? – Tim Wolosz, Enberg Anderson Architects and Ricky McLain, WoodWorks
• Early Design Decisions: Priming Mass Timber Projects for Success – David Hanley, Archie Landreman and Ricky McLain, WoodWorks

Designing and Building with Mass Timber: Design, Planning and Performance

June 17, 2022 | Regional Online Event

• Designing and Building with Mass Timber: Design, Planning and Performance – Mike Romanowski, WoodWorks
• Mass Timber Construction Management – Brandon Brooks, WoodWorks

Mass Timber: Early Design Decisions for Successful Multi-Family Housing

June 15, 2022 | Regional Online & In-Person Event – Falls Church, VA

• Mass Timber: Early Design Decisions for Successful Multi-Family Housing – John O’Donald II, WoodWorks

Early Design Decisions: Priming Mass Timber Projects for Success

June 14, 2022 | Regional Online Event

• Early Design Decisions: Priming Mass Timber Projects for Success – Momo Sun, WoodWorks

Designing and Building with Mass Timber: Design, Planning and Performance

June 13, 2022 | Regional Online Event

• Designing and Building with Mass Timber: Design, Planning and Performance – Laura Cullen and Jessica Scarlett, WoodWorks
• Mass Timber Construction Management – Brandon Brooks, WoodWorks

Concealed Spaces in Wood-Frame and Mass Timber Construction

June 8, 2022 | National Online Webinar

• Concealed Spaces in Wood-Frame and Mass Timber Construction – Karen Gesa, Bruce Lindsey & Ricky McLain, WoodWorks

Designing and Building with Mass Timber: Design, Planning and Performance

June 3, 2022 | Regional Online Event

• Designing and Building with Mass Timber: Design, Planning and Performance – Jason Bahr and Mark Bartlett, WoodWorks
• Mass Timber Construction Management – Brandon Brooks, WoodWorks

Mass Timber Construction: Products, Design, Logistics and Risk Analysis

May 26, 2022 | Regional Online & In-Person (East Lansing, MI) Event

• Mass Timber Construction: Products, Performance and Design – Anthony Harvey, WoodWorks
• Mass Timber Construction Management: Economics, Logistics & Risk Analysis – Anthony Harvey, WoodWorks

Designing and Building with Mass Timber: Design, Planning and Performance

May 20, 2022 | Regional Online Event

• Designing and Building with Mass Timber: Design, Planning and Performance – David Hanley, WoodWorks
• Mass Timber Construction Management – Brandon Brooks, WoodWorks

Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?

May 19, 2022 | Regional Online Event (Northwest)

• Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project? – Chelsea Drenick & Janelle Leafblad, WoodWorks

Lateral Design for Mass Timber Structures: How to Do It, How It’s Been Done

May 5, 2022 | National Online Event

• Lateral Design for Mass Timber Structures: How to Do It, How It’s Been Done – Scott Breneman, WoodWorks

Common Challenges in Wood Lateral System Layouts

May 3, 2022 | National Online Event

• Common Challenges in Wood Lateral System Layouts – Terry Malone, WoodWorks

CA Codes for Mass Timber Buildings: Project Approvals and Fire Performance

April 21, 2022 | Newark, CA & Online

• Mass Timber Introduction – Chelsea Drenick, WoodWorks
• State of California’s Perspective on Mass Timber – Katie Harrell, California Board of Forestry and Fire Protection
• Mass Timber Fire Testing to Establish Tall Wood Code Changes – Paul Armstrong, AWC
• Mass Timber Code Provisions in the CBC – Chief Greg Andersen, CAL FIRE
• Mass Timber Fire Design – Bevan Jones, Holmes

A Mass Timber Clinic: Introducing and Mastering Design Topics

April 12, 2022 | Portland, OR (Mass Timber Conference)

• Introducing and Mastering Design Topics – Janelle Leafblad, WoodWorks
• Serving Occupant Needs: MEP Integration & Acoustics – Laura Cullen, WoodWorks
• Code Compliance – Mark Bartlett, Bruce Lindsey & Chelsea Drenick, WoodWorks
• Mass Timber Structural Design: Engineering Modern Timber Structures – Scott Breneman & Marc Rivard, WoodWorks

Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project?

April 5, 2022 | Regional Online Event

• Mass Timber in Multi-Family Housing: Is It a Good Fit for Your Project? – Jason Bahr & David Hanley, WoodWorks

Early Design  Decisions: Priming Mass Timber Projects for Success

March 23, 2022 | Regional Online Event

• Early Design  Decisions: Priming Mass Timber Projects for Success – Mark Bartlett, WoodWorks

Early Design  Decisions: Priming Mass Timber Projects for Success

March 16, 2022 | Regional Online Event

• Early Design  Decisions: Priming Mass Timber Projects for Success – Chelsea Drenick & Mike Romanowski, WoodWorks

Early Design  Decisions: Priming Mass Timber Projects for Success

March 15, 2022 | Regional Online Event

• Early Design  Decisions: Priming Mass Timber Projects for Success – Janelle Leafblad, WoodWorks

Mass Timber Construction: Products, Performance and Design

March 10, 2022 | Regional In-Person (Charlotte, NC) & Online Event

• Mass Timber Construction: Products, Performance and Design – Jessica Scarlett, WoodWorks

Passive House Design for Mass Timber and Wood-Frame Multi-Family Projects

March 9, 2022 | National Online Event

• Orchards at Orenco: Phase I vs. Phase II – Michael Bonn, Ankrom Moisan
• Leveraging Solid Wood in Passive House Enclosure – Evan Smith, Liz Hauver, Placetailor

Early Design  Decisions: Priming Mass Timber Projects for Success

March 3, 2022 | Regional In-Person & Online Event

• Early Design  Decisions: Priming Mass Timber Projects for Success – Jeff Peters, WoodWorks

2021 Tall Wood Code Provisions and Mass Timber Construction Management

March 1, 2022 | Regional In-Person & Online Event

• New Tall Wood Code Provisions: Understanding Advanced Design Topics – Archie Landreman, WoodWorks
• Mass Timber Construction Management: Economics, Logistics & Risk Analysis – Archie Landreman, WoodWorks

Zero Lot Line Buildings and Wrap- Around Structures: Detailing Exterior Walls

February 16, 2022 | National Online Event

• Design Strategies for Podium and Wrapper Buildings – Brian Gobell, Hord Coplan Macht
• Zero Lot Line Buildings and Wrap-Around Structures: Detailing Walls – Chelsea Drenick,  and Jeff Peters, WoodWorks
• Exterior Wall Detailing Zero-Lot Lines – Colin Shane, RDH Building Science Inc.

Detailing for Wood-Frame Exterior Walls

February 9, 2022 | National Online Event

• Exterior Wall Ratings, Assemblies & Component Impacts on Fire Performance – Janelle Leafblad, WoodWorks
• Jogging Exterior Walls, Bearing vs. Not – Anthony Harvey, WoodWorks
• Floor to Exterior Wall Details – Mike Romanowski, WoodWorks
• Fire-Resistance Detailing for Wood-Frame Exterior Walls: Case Studies – Don Havener, Cosentini Associates & Chris Poles, CUBE 3

Let’s Talk About Wood: Science, Carbon and Multi-Family Building Design

December 16, 2021 | Regional Online Event

• Let’s Talk About Wood: Science, Carbon and Multi-Family Building Design – Janelle Leafblad and Chelsea Drenick, WoodWorks

Early Design Decisions: Priming Mass Timber Projects for Success

December 16, 2021 | Regional Online Event

• Early Design Decisions: Priming Mass Timber Projects for Success  – Bruce Lindsey & Jessica Scarlett, WoodWorks

Modern Timber Design: A Dive into Nail-Laminated Timber & Tall Wood

December 15, 2021 | Regional Online Event

• Nail-Laminated Timber: Compelling Architecture with Modern Timber Design – Archie Landreman, WoodWorks
• New Tall Wood Code Provisions: Understanding Advanced Design Topics – Archie Landreman, WoodWorks

The Carbon Footprint of Wood Buildings & Mass Timber Performance

December 14, 2021 | Regional Online Event

• Carbon Footprint of Wood Products & Buildings  – Marc Rivard, WoodWorks
• Mass Timber Construction: Products, Performance and Design – Momo Sun, WoodWorks

Interior Wall and Floor Assemblies in Mid-Rise Multi-Family: Designing for Fire, Acoustics & Structure

December 8, 2021 | National Online Webinar

•  Interior Wall and Floor Assemblies in Mid-Rise Multi-Family: Designing for Fire, Acoustics & Structure  –  Karen Gesa, Ricky McLain & Ashley Cagle, WoodWorks

Mass Timber Construction Management: Executing the Design

December 3, 2021 | National Online Event

• Introduction – Brandon Brooks, WoodWorks
• Project Study: Ascent Milwaukee, Managing Your First Mass Timber Project: Workflow Mapping and Coordination – Dave Kwiatkowski and Chris Johansen, CD Smith
• Project Study: Google Sunnyvale Project Optimizing Transportation and Staging – Dave Beck, XL Construction
• Project Study: Nashville Warehouse Office – Nick Garzini and Kyle Wortendyke, DPR

Mass Timber Structural Design: Tips for Practicing Engineers

November 10, 2021 | National Online Webinar

• Mass Timber Structural Design: Tips for Practicing Engineers –  Scott Breneman, WoodWorks & Eloïse Allsop, Fast + Epp

A 2021 Snapshot: Challenges, Trends and Advancements in Wood Design and Construction

November 4, 2021 | National Online Event

• 2021 Year-In-Review: Trends in Light-Frame and Mass Timber Construction – Janelle Leafblad, Jeff Peters and Laura Cullen, WoodWorks
• Fire, Acoustics, and Structural Detailing of Light-Frame Horizontal Assemblies – Ashley Cagle, Chelsea Drenick & Mike Romanowki, Woodworks
• Penn State College of Engineering West 2: The Innovation & Making Hub – Jennifer Hardy, Payette and Adam Green, Whiting Turner
• Evaluating the Cost, Carbon, and Energy Impacts of Different Structural Systems – Greg Kingsley, KL&A Engineers & Builders
• Mass Timber Design – Bevan Jones & Parisa Nassiri, Holmes Fire
• Six Over Two Podium Buildings: Analog & Moraine Tacoma Case Studies – Paul Del Vecchio, Ethos Development, Adam Hostetler, Works Progress Architecture & Alex Davis, PCS Structural Solutions
• Passive House Multifamily Construction – Kim Bretheim, LHB
• 2021 Special Design Provisions for Wind and Seismic (SDPWS) – Philip Line, American Wood Council
• The Duke: Mass Timber & Light Frame Hybrid – Forrest Bratton, WGI
• Adidas North America – Thomas Robinson, LEVER Architecture; Anne Monnier, KPFF; Kyle Warren, Turner Construction

Structural Grids, Fire Resistance and MEP: Holistic Coordination in Mass TimberDesign

October 13, 2021 | National Online Webinar

• Structural Grids, Fire Resistance and MEP: Holistic Coordination in Mass TimberDesign – Janelle Leafblad, WoodWorks, Katie M. Ritenour, KPFF and Katie Zabrocki, PAE

2021 IBC Tall Wood and Critical Design Topics

October 7, 2021 | Regional Online Event

• New Tall Wood Code Provisions: Advanced Fire Design for Exposed Timber – Anthony Harvey, WoodWorks
• Tall Timber Building Design: Acoustics, Connections and Fire Protection – Anthony Harvey, WoodWorks

Building Sustainably: Wood’s Role in Healthy Forests and Healthy Buildings

October 6, 2021 | Regional Online Event

• Building Sustainably: Wood’s Role in Healthy Forests and Healthy Buildings – Mike Romanowski, WoodWorks

Multifamily Design in Urban Landscapes: Light Frame & Mass Timber

September 23, 2021 | Regional Online Event

• Mass Timber Multifamily Construction: Products, Performance and Design – Mark Bartlett, WoodWorks
• Introduction to Heights and Areas for Mid-Rise Wood Frame Buildings – Jason Bahr, WoodWorks

Mixed-Occupancy Buildings: Design for Density with Confidence

September 15, 2021 | National Online Webinar

•  Mixed-Occupancy Buildings: Design for Density with Confidence – Ashley Cagle, Karen Gesa and Terry Malone, WoodWorks

Mass Timber Construction Management: Unique Considerations for Success

August 20, 2021 | National Online Event

• WoodWorks Mass Timber Construction Management Program – Brandon Brooks, PMP
• Making the Case & Keeping Costs in Check – Jason Bahr, WoodWorks
• MSU STEM Building CM Case Study & Mass Timber Education – George Berghorn, Michigan State University
• Mass Timber Construction Management: Design Engagement & Site Planning – Ankit Sanghvi, PCL Construction Services, Inc. 
• Efficient Structural Designs for Mass Timber Buildings: The Engineer’s Role in Optimization – Ricky McLain, WoodWorks & Greg Kingsley, KL&A Engineers and Builders
• Risk Analysis and Scheduling Approaches – Taylor Cabot, Timberlab

AIA Conference Architecture 2021

August 19, 2021 | National Online Event

•  Tall Timber Buildings: Where Sustainability Meets Performance – Ricky McLain, WoodWorks

Affordable Housing and Wood Construction: How to Make the $ Work

August 11, 2021 | National Online Webinar

• Affordable Housing and Wood Construction: How to Make the $ Work – Todd Rothstein, CPHC, Avesta Housing & Maggie Stanley, CWS Architecture + Interior Design

A Detailing Deep Dive: Fire, Acoustics and Structural Detailing in Mid-Rise Multi-Family

July 22 & 27, 2021 | National Online Event

• Interior Walls: Code Overview, Differences & Similarities & Unit Demising Walls and Corridor Walls – Ricky McLain, Laura Cullen & Chelsea Drenick, WoodWorks
• Shaft Walls and Fire Walls: Assemblies and Intersections – Anthony Harvey, Janelle Leafblad, Ashley Cagle, WoodWorks
• Adding Value: Commonly Overlooked Areas for Wood Framing – Momo Sun, Karen Gesa, WoodWorks

Mass Timber in Multi-Family Housing: Is it a Good Fit for Your Project?

July 14, 2021 | National Online Webinar

• Mass Timber in Multi-Family Housing: Is it a Good Fit for Your Project?– Ricky McLain, WoodWorks and Scott Noble, Kaiser Group Inc

Mass Timber Construction + Exploring Tall Wood

June 29, 2021 | Regional Online Event

• Mass Timber Construction: Products, Performance and Design – Archie Landreman, WoodWorks
• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Anthony Harvey, WoodWorks

Designing and Constructing Mid-Rise and Taller Mass Timber Buildings

June 15, 2021 | Regional Online Event

• Designing and Constructing Mid-Rise and Taller Mass Timber Buildings – Chelsea Drenick and Mike Romanowski, WoodWorks

Optimizing Mass Timber Connections

June 9, 2021 | National Online Webinar

• Optimizing Mass Timber Connections – Brian Malone, KL&A, Inc. Structural Engineers and Builders

Wood Design Symposium – What’s New and What’s Next for Wood Design and Construction

May 27, 2021 | National Online Symposium

• Fuel Your Growth: U.S. Constructions Starts Forecast – Richard Branch, Dodge Data & Analytics
• Force Transfer Around Openings Update – Aleeta Dene – APA
• Nashville Warehouse Company – Michael Hines and Rachel Killion
• Carbon Accounting & How We Can Build More Sustainably – Pat Layton, Clemson University & Indroneil Ganguly, University of Washington
• Key to Success: Early Design Decisions for Mass Timber – Janelle Leafblad, Terry Pattillo, & Ricky McLain, WoodWorks
• Mass Timber Connections – Greg Kingsley, KL&A Engineers
• El Verano Community School Multi-Purpose Building – David Rapp & Bennett Martin, STRATAap.
• Integrating MEP with Structural Grids:Holistic Coordination in Mass Timber – Katie Ritenour
• Force Transfer Around Opening; Case Study: Las Ventanas, Long Beach, CA – Hooman Tavallali, Core Structure, Inc
• Mass Timber Floor Design for Walking-Induced Vibrations – Reid Zimmerman, KPFF Portland
• CLT Floor and Roof Diaphragms for Seismic and Wind Resistance – By Scott Breneman, WoodWorks
• The Mass Timber Construction Manual – Brandon Brooks, WoodWorks

Detailing for Durable Wood Buildings: Where Structure and Moisture Meet

May 12, 2021 | National Online Webinar

• Detailing for Durable Wood Buildings: Where Structure and Moisture Meet – Matthew Worster, Simpson Gumpertz & Heger, Warren Hamrick, APA – The Engineered Wood Association

Mastering Mixed-Use: Wood Building Analysis & Shaft Wall Solutions

April 29, 2021 | National Online Webinar

• Taking the Guesswork out of Mixed-Use Building Analysis – Marc Rivard, Terry Pattillo & Momo Sun, WoodWorks
• Shaft Wall Solutions for Wood-Frame Structures – Marc Rivard, Terry Pattillo & Momo Sun, WoodWorks

Mass Timber Construction Management: Design Through Project Close Out

April 23, 2021 | National Online Workshop

• Wofford College Environmental Studies Building – Daniel Wirth, Minimal Impact Group
• Sustainable Forestry – Kathryn Fernholz, Dovetail Partners, Inc.
• Design Engagement & Site Planning – Ankit Sanghvi – DBIA®, LEED-AP®, PCL Construction Services, Inc.
• Risk Analysis and Scheduling Approaches – Dean Lewis, Swinerton
• Structural Mass Timber Design: The Engineer’s Role in Optimization – Greg Kingsley, PhD, PE, KL&A Engineers and Builders
• Making the Case & Keeping Costs in Check – Jeff Peters, PE, WoodWorks
• 80 M Street Case Study – Sean Fox, Senior Project Manager, James G. Davis Corporation
• Mass Timber and the WoodWorks Construction Management Program – Brandon Brooks, MBA, PMP

Long Span Mass Timber: Designing the University of Idaho’s New Arena

April 14, 2021 | National Online Webinar

• Long Span Mass Timber: Designing the University of Idaho’s New Arena – Chris Roberts, Opsis Architecture, Judsen Williams, KPFF, Lucas Epp, Fast + Epp

Essential Design & Detailing Aspects of Mid-Rise Wood-Frame Construction

March 18, 2021 | Regional Online Event

• Essential Design & Detailing Aspects of Mid-Rise Wood-Frame Construction – Marc Rivard and Terry Pattillo, WoodWorks

Mass Timber Hybrid Systems: Combining Structural Materials to Maximize Efficiency

March 10, 2021 | National Online Webinar

• Mass Timber Hybrid Systems: Combining Structural Materials to Maximize Efficiency – Scott Williams, dunaway/WILLIAMS architects, Bart Whatley, Delineate Studio & Todd Everett

Details Make the Design Work: Coordinating Structural and Architectural Requirements in Light-Frame and Hybrid Wood Buildings

February 23-25, 2021 | National Online Event

• Detailing Considerations for Light Wood Framing of Multi-family Structures – James Sneed, Jr, PE, Kimley Horn
• Detailing and Best Practices of Developing the Lateral Load Paths – Nathan Hoffman, PE, Sandman Structural Engineers
• Wellington Mixed-Use Case Study – Douglas R. Steimle, PE, Schaefer and Seth Oakley, AIA, LEED AP, NCARB, M+A Architects
• Mass Timber Hybrid Housing in Denver – Chris Kendall, PE, Principal, KL&A Engineers and Builders
• Exploring Mass Timber’s Role in Hybrid Multi-Family Housing: A Case Study from the Bay Area – Scott MacLellan, Gurnet Point
• The Magdalena: A mass timber hybrid boutique hotel – Michael Britt, AIA, LEED AP, BD+C, Lake|Flato Architects & Lucas Epp, PE, P.Eng., StructureCraft

Setting a Precedent: Mass Timber at Michigan State University’s new STEM Facility

February 10, 2021 | National Online Webinar

• Setting a Precedent: Mass Timber at Michigan State University’s new STEM Facility – Kevin Marshall, Integrated Design Solutions & George H. Berghorn, Michigan State University

A Tale of Two Timber Towers

January 13, 2021 | National Online Webinar

• A Tale of Two Timber Towers – Alejandro Fernandez, Thornton Tomasetti & Kristina Miele, Fast + Epp

CLT Diaphragm Design: New Code Provisions and Design Examples

December 9, 2020 | National Online Webinar

• CLT Diaphragm Design: New Code Provisions and Design Examples – Philip Line, American Wood Council, Scott Breneman, WoodWorks

A Master Class on Wood Lateral-Resisting Systems: In-Depth Diaphragm Layout and Analysis

December 3, 2020 | National Online Event

• A Master Class on Wood Lateral-Resisting Systems: In-Depth Diaphragm Layout and Analysis – Terry Malone, WoodWorks

A New Path Forward for Tall Wood Construction: Applying Code Provisions and Design Steps

November 19, 2020 | Regional Online Event

• New Tall Wood Code Provisions: Advanced Fire Design for Exposed Timber – Ricky McLain, WoodWorks
• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Marc Rivard, WoodWorks

Enclosure Design for Mass Timber Buildings

November 18, 2020 | National Online Webinar

• Enclosure Design for Mass Timber Buildings – Colin Shane, RDH Building Science Inc

Design and Construction Challenges During this Time of Unprecedented Change

November 11 & 12, 2020 | National Online Symposium

• Keynote: From Pandemics to Wildfires, Sustainability and Resiliency in 2020 (and Beyond) – Billy Grayson, Urban Land Institute
• Climate Change Impacts on Forests & Wildfires – Paul Hessburg, USDA Forest Service
• Fire Suppression and Development in the WUI – Ken Pimlott, CAL FIRE
• Utilizing Wood in Construction Supports Healthy Forests and Rural Economies – Janelle Leafblad, WoodWorks
• Mass Timber Spec Offices: Developers Share Real Deal Business Cases – Melissa Kroskey, WoodWorks, Noel Johnson, Cairn Pacific, Michael Heller, Heller Pacific
• Environmental Benefits of Mass Timber – David Hanley, WoodWorks

• Keynote: Industrialized Construction and Lean Manufacturing – Amy Marks, Autodesk
• Modular Multi-Family at Scale: Designing for Fabrication Mindset – Kendra Halliwell, ICON Architecture
• Trends in Enclosure and Durability Detailing: Wood-Frame Multi-Family – David Ford, Walter P Moore
• Paneling with Purpose – Aleeta Dene, APA
• Things You Should Know Before Your First Passive House Project – Brittany Porter, Weber Thompson
• Passive House Implementation: Regional Variations in Standards and Practice – Prudence Ferreira, Morrison Hershfield
• Context for Type III Construction in Modern Mid-Rise – Ali Fattah, City of San Diego
• Detailing Floor to Wall Intersections in Type III Construction – Jason Smart, American Wood Council
• Exterior Walls in Type III Construction: Materials and Impacts of Cavity Insulation – Samir Mokashi, Code Unlimited
• Tall Mass Timber: Teamwork Makes the Dream Work – Ilana Danzig, P.Eng., Struct.Eng., M.Eng., ASPECT Structural Engineers
• Alternative Design Approaches for Exposed Wood – Mark Chubb, Code Unlimited
• Compartment Fire Testing for Exposed Wood in Tall Timber Structures – Jason Smart, American Wood Council
• What Can We Learn from Changing Multi-Family Markets? – Chelsea Drenick, WoodWorks

Mass Timber Construction Management + IBC 2021 Code Provisions

October 29, 2020 | Regional Online Event

• Part 1- Mass Timber Construction Management – Anthony Harvey, WoodWorks
• Part 2- New Tall Wood Code Provisions 2021 IBC-Part II – Anthony Harvey, WoodWorks

Building Sustainably: From Forestland Management to Carbon-Positive, Healthy Buildings

October 20, 2020 | National Online Event

• Setting the Stage for a Sustainable Future with Timber Construction – Mark Bartlett, WoodWorks
• Sustainable Forestry: Renewable Materials Storing Carbon – Katie Fernholz, Dovetail Partners
• Forestry Certifications: Management, Fiber Sourcing and Chain-of-Custody – Lauren Cooper, Michigan State University
• Sustainable Forestry on Public Lands – Brian Brashaw, USDA Forest Service, Forest Products Laboratory
• Carbon Storage in Forests and Wood Buildings: Myths, Misconceptions or Reality? – Dr. Indroneil Ganguly, Univ of Washington
• LCAs & Wood: Environmental Impacts of Wood throughout its Life Cycle – Maureen Puettmann, PhD, WoodLife Environmental Consultants, LLC, CORRIM
• A Designer’s Approach to WBLCA and Mass Timber Benefits – Scott Barton-Smith,  Hacker Architects
• Wood’s Contributions to Biophilic Design – Janelle Leafblad, WoodWorks
• Sustainability Trends in Real Estate –Monika Henn, Urban Land Institute Greenprint

Mass Timber Floor Vibration Design Guide: A New Resource for Engineers

October 14, 2020 | National Online Webinar

• Mass Timber Floor Vibration Design Guide: A New Resource for Engineers – Scott Breneman, WoodWorks

Wood Construction Applications in Industrial and Warehouse Facilities

October 7, 2020 | National Online Event

• Construction of Large Low-slope Roofs: Faster, Safer, Lower Cost – Mark A. Dalton, Panelizes Structures
• Tilt Up Wood Walls, Engineering Considerations and Case Studies – Terry Malone, WoodWorks
• Tall Tilt Up Mass Timber Construction: Duratus CrossFit in Spokane, WA – Mike Bradley, Beacon Builders
• Making Best Use of Tall Wood Shaft Walls – Jeff Morrow , J Morrow Solutions

Type III Fire-Resistant Design and Detailing: Exterior Walls, Intersections and Balconies

September 24, 2020 | Regional Online Event

• Firewalls, Fire Barriers & Fire Partitions – Terry Pattillo, WoodWorks
• Exterior Walls, Intersections & Balconies – Bruce Lindsey, WoodWorks

Mass Timber’s Growing Foothold in the Northeast

September 23, 2020 | Regional Online Event

• Hybrid Mass Timber + Steel RISD Quad –David J Odeh, Odeh Engineers
• Bowdoin College Mills Hall and Center for Arctic Studies – Matt Tonello, Consigli Construction
• 90 Arboretum – Sean Cashman, Aberthaw Construction Company
• Forest-to-Cities: Linking Climate-Smart Forestry with Mass Timber Construction – Frank Lowenstein, New England Forestry Foundation

New Options for Tall Timber Buildings in California: Understanding Codes and Design

September 22, 2020 | Regional Online Event

• New Options for Tall Timber Buildings in California: Understanding Codes and Design – Janelle Leafblad, WoodWorks

New Options for Tall Timber Buildings in California: Understanding Codes and Design

September 17, 2020 | Regional Online Event

• New Options for Tall Timber Buildings in California: Understanding Codes and Design – Mike Romanowski, WoodWorks

Modular Wood-Frame for Multi-Family: Design, Details and Delivery

September 9, 2020 | National Online Webinar

• Modular Wood-Frame for Multi-Family: Design, Details and Delivery – Matthew Laase, Jackson|Main Architecture

Mass Timber Construction Management: Design Through Project Close Out

August 19 & 27, 2020 | National Online Event

• Design Tips for Mass Timber: Understanding the Products, Designing to Meet Code – Mark Bartlett, WoodWorks
• Sustainable Forestry: Renewable Materials Storing Carbon – Katie Fernholz, Dovetail Partners
• Risk Analysis & Scheduling Approaches – Christopher Evans, Swinerton Mass Timber
• Design Engagement: Building the Team and Managing the Design – Ankit Sanghvi, PCL Construction
• Site Planning—Logistics, Coordination, Safety, & Site Management – Brad Nile, Andersen Construction
• Economics: Taking on Financial Responsibility – Chris Kendall KL&A
• The Designer’s Role in Anticipating and Addressing Construction Hurdles –Scott Barton-Smith, Hacker Architect
• Making the Case and Keeping Costs in Check – Janelle Leafblad, WoodWorks

Light-Frame Construction: What You Need to Know About Species, Grading and Shrinkage

August 25, 2020 | Regional Online Event

• Accommodating Shrinkage in Multi-Story Wood-Frame Structures – Terry Pattillo, WoodWorks
• Introduction to Wood Species and Grading – Bruce Lindsey, WoodWorks

Sound Solutions: Designing for Acoustics in Wood Structures

August 12, 2020 | National Online Webinar

• Sound Solutions: Designing for Acoustics in Wood Structures – Ricky McLain, WoodWorks

Mass Timber Construction Management: An Introduction to Materials, Applications, Systems and Constructability

July 22, 2020 | Regional Online Event

• Mass Timber Construction Management: An Introduction to Materials, Applications, Systems and Constructability – Bruce Lindsey, WoodWorks

Exploring Tall Wood in Utah: New Code Provisions for Tall Timber Structures

July 22, 2020 | Regional Online Event

• Exploring Tall Wood in Utah: New Code Provisions for Tall Timber Structures – Janelle Leafblad, WoodWorks

Exploring Tall Wood: New Code Provisions for Tall Timber Structures

July 15, 2020 | Regional Online Event

• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Jeff Peters, WoodWorks

Mass Timber and Wood-Frame Construction: Design Best Practices

July 14, 2020 | Regional Online Event

• Mass Timber and Wood-Frame Construction: Design Best Practices – Anthony Harvey, WoodWorks

Durability, Termites and Moisture Control: Building Enclosure Design for the South

June 24, 2020 | National Online Event

• Durability and Moisture Control –Building Enclosure Design for the South – David T. Ford, Walter P Moore
• Termite Prevention and Control by Design in the Southeast – Faith M. Oi, PhD

Is Wood-Frame Modular the Future of Multi-Family Construction?

June 17, 2020 | National Online Event

• Building Enclosure Design for Modular Construction – Joseph P. Piñon, RDH Building Science
• Structural Design: Detailing Strategies – Aaron Miller, DCI Engineers
• Structural Design: What’s Different and What’s the Same? – Aaron Miller, DCI Engineers
• Architectural Detailing: Detailing Strategies & Case Studies – Matthew Laase, Jackson|Main Architecture
• Architectural Design: What’s Different and What’s the Same – Matthew Laase, Jackson|Main Architecture

Mass Timber at the University of Denver: An Authentic Expression of Sustainability

June 10, 2020 | National Online Webinar

• Mass Timber at the University of Denver: An Authentic Expression of Sustainability – Dan Craig, Shears Adkins Rockmore Architects & Chris Kendall, KL&A Engineers and Builders

Finding Opportunity in Changing Markets: Advancements in Mass Timber & Wood-Frame Building Design

June 3, 2020 | National Online Event

• Thinking Inside the Box: Modular Construction Demystified – Kendra Halliwell, ICON Architecture & Owen Huisenga, Tocci Building Corporation
• Mass Timber and Light-Frame Hybrid Systems in Multi-Family Buildings – Scott Noble, Kaiser Group, Inc.
• Engineering Cleveland’s First Nine-Story Mass Timber Building – Sarah FitzMaurice, Fast + Epp
• Connections in a Mass Timber Structure: Design & Budget Strategies – Chris Kendall, KL&A Engineers and Builders
• New Hampshire’s First Mass Timber Office Building: From Concept to Construction – Roger W. “Sam” Altreuter, Farley White Interests, and Jeffrey S. Tompkins
• Keynote: Potential Impacts of COVID-19 on US Construction Market – Richard Branch, Chief Economist, Dodge Data & Analytics
• Mid-Rise Wood Construction: Navigating Codes and Detailing Assemblies – Brian Kuhn, Code Red Consultants
• Lateral Design and Detailing for Wood-over-Podium Construction – Jeremiah O’Neill, H + O Structural Engineering
• nnovative Building Solutions: Exceeding Objectives in Multi-Family Construction – Sharon Roscher, LP
• ier 70 in San Francisco: The Largest Mass Timber Office Building in the US – Scott Barton-Smith, Hacker Architects
• Fifty West: Mass Timber Arrives in Florida in Class A Style – Jeff Powell, Powell Studio Architecture
• Office Overbuild: Building a Vertical Mass Timber Addition in DC – Tom Corrado, Hickok Cole
• Southern Pine Mass Timber’s Structural Performance at Wofford College – David Impson, Britt, Peters and Associates
• Ascent Milwaukee: Designing the Tallest Mass Timber Building in the US – Jason Korb, Korb + Associates Architects

Hybrid Mass Timber + Steel at the Rhode Island School of Design Residence Hall

May 13, 2020 | National Online Webinar

• Hybrid Mass Timber + Steel at the Rhode Island School of Design Residence Hall – David J Odeh, Odeh Engineers, Inc.

A Mass Timber Digest: Advanced Building Design Topics for Modern Timber Structures

April 29, 2020 | National Online Event

• Fire, Acoustics and Structural Design of Mass Timber: How They’re all Integrated – Mark Bartlett, WoodWorks
• Building Enclosure and Durability Design for Mass Timber Structures – Eric Wood, Morrison Hershfield
• Mile High View: A Colorado Perspective on the Mass Timber Movement –Joseph Anastasi, AIA, LEED AP BD+C, OZ Architecture

Mile-High Mass Timber: Exploring New Possibilities for Wood in Denver

April 22, 2020 | National Online Event

• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – David Hanley, WoodWork
• Structural Design of Mass Timber – Greg Kingsley, PhD, PE, KL&A Engineers and Builders
• Construction Considerations for Mass Timber – Ankit Sanghvi, DBIA, LEED-AP, PCL Construction Services, Inc.
• INTRO:  A 9-story mixed-use mass timber building in the heart of Cleveland –John Mitchell, LEED AP BD+C, Hartshorne Plunkard Architecture

Innovative Timber Construction in the Southeast

April 14, 2020 | National Online Event

• Mass Timber Buildings in the Southern US: A Clemson University Case Study – Brian Campa, AIA, LEED AP, Cooper Carry
• Detailing Mass Timber Buildings for Fire Safety – David Barber, Arup
• Mass Timber Connections: Building Structural Design Skills – Duncan Bourke, PEng, BSc, ASPECT Structural Engineers
• Navigating Code Requirements for Mass Timber – Paul Coats, PE, CBO, American Wood Council
• Mid-Rise Engineering Considerations for Engineered Wood Products – Boise Cascade
• Advanced Detailing Techniques for Building Enclosures – Robert J. Dinjar, PE, Rimkus Building Consultants
• Frame it Right! Back to Basics for Big Buildings – Robert (Bob) Kuserk, PE, APA
• Framing Techniques for Builders: Lessons Learned and Best Practices – Weyerhaeuser
• Mass Timber Cost Optimization: How the Details Influence the Big Picture – Bruce Lindsey, WoodWorks
• Structure, Fire & Acoustics Shouldn’t Exist in Separate Silos for Mid-Rise – Bruce Lindsey, WoodWorks

Mass Timber Enables Beauty, Warmth and Functional Design in The Soto

April 8, 2020 | National Online Webinar

• Mass Timber Enables Beauty, Warmth and Functional Design in The Soto – Todd Wascher, Lake|Flato, & Mike Smith, BOKA Powell

Engineering the First 6-over-2 Podium Building in the U.S.

March 11, 2020 | National Online Webinar

• Engineering the First 6-over-2 Podium Building in the U.S. – Ryan Miller, Buehler Engineering

Evolving Codes and Innovative Timber Construction in the Midwest

March 11, 2020 | Chicago, IL

• 1040 West Fulton: Chicago’s First Modern Heavy Timber Structure – John Mitchell, Hartshorne Plunkard Architecture
• The Inside Story of Minneapolis’s First Multi-Family Passive House Building – Kim Bretheim, LHB
• Sustainable Timber Construction at Michigan State University’s new STEM Facility – Kevin Marshall, ntegrated Design Solutions
• Chicago Building Code Modernization & Impacts on Wood Construction – James Smith, American Wood Council
• The Evolution of Mid-Rise Design: Code Changes = New Opportunities – Archie Landreman, WoodWorks
• Detailing Mass Timber Buildings for Fire Safety – David Barber, Arup
• Design of Wood Cantilever, Open-Front Diaphragms – Scott Breneman, PhD, WoodWorks (not available)
• Ascent Milwaukee: Designing the Tallest Mass Timber Building in the United States – Jason Korb, Korb + Associates Architects
• INTRO, Cleveland: Nine Stories of Type IV-B Mass Timber in Cleveland – Dan Whalen, Harbor Bay Real Estate Advisors
• Not Just Another Condo Building: TMBR and a Smart Construction Revolution – Colin Oglesbay, D/O Architects

An Engineer’s Guide to Mass Timber Structures

March 5, 2020 | Nashville, Atlanta & Charlotte

• Mass Timber Overview: Systems, Products & Codes – Bruce Lindsey, WoodWorks
• An Engineer’s Guide to Mass Timber Structures: Simplifying Design Steps and Connection Details – Scott Breneman, PhD, WoodWorks

A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps

March 3, 2020 | Boston, MA

• Part one | Part two – Marc Rivard, WoodWorks

Texas Wood Design Symposium

February 25, 2020 | Houston, TX

• Wood-Frame Shear Wall and Diaphragm Design –Tim Strasser, WoodWorks
• Structural Engineering of Texas Mid-Rise Buildings – Drew Dudley, Dudley Dunham Engineering, Texas A&M University
• Before the Storm: Building for High-Wind Resistance –Cathy Scarince APA – The Engineered Wood Association
• Detailing Specific Cladding Requirements for Mid-Rise Wood-Framed Buildings –Warren R. French, French Engineering
• Making a Texas Timber Statement: Innovation through the Lens of Higher Education Projects –Darrell Whatley & Steve Durham, Kirksey | Architecture
• Taller with Timber: New Code Provisions and Design Steps for Tall Wood Buildings –Ricky McLain, WoodWorks
• Mass Timber Enables Beauty, Warmth and Functional Design in The Soto –Danielle Smyth, BOKA Powell and Todd Wascher, AIA, LEED AP BD+C, Lake|Flato
• Engineering Mass Timber Structural Framing Systems – Michael A. Dupras, Green Associate, DCI Engineers
• A Mass Timber Breakthrough? Aligning the Pieces for Timber Construction in the South – Danielle Smyth, BOKA Powell, Darrell Whatley, AIA, NCARB, LEED AP, Kirksey | Architecture, and Michael A. Dupras, Green Associate, DCI Engineers

Structural Engineers Association of Maine

February 21, 2020 | Maine

• Structural Engineering of Mid-Rise Wood-Frame Construction – Marc Rivard, and Ricky McLain, WoodWorks

A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps

February 19 & 20, 2020 | Los Angeles & San Diego, CA

• Part one | Part two – Mike Romanowski, WoodWorks

Wood-Frame Multi-Story Construction: Design Considerations and Best Practices

February 18 & 19, 2020 | Huntsville & Birmingham, AL

• Wood-Frame Multi-Story Construction: Design Considerations and Best Practices – Jeff Peters, WoodWorks

Mass Timber Construction Management: Design through Project Close Out

February 19, 2020 | Dallas, TX

• Sustainability of North American Wood Products –Tiffanie Starr Forest Landowners Association
• Mass Timber Overview – Mark Bartlett, WoodWorks
• Structural Mass Timber Design: The Engineer’s Role in Optimization – Greg Kingsley, PhD, KL&A Engineers and Builders
• Risk Management – Zach Brehm, Swinerton
• Site Planning – Brad Nile, AIA, Andersen Construction
• Making the Case & Keeping Costs in Check – Melissa Kroskey, WoodWorks
• Design Engagement: Building the Team and Managing the Design – Brad Nile, Andersen Construction

Types III, IV and V: Design and Construction Techniques for Mass Timber & Wood-Frame Buildings

February 12 & 13, 2020 | Portland, OR & Seattle, WA

• Mass Timber Overview: Systems, Products & Codes – Ethan Martin, WoodWorks
• Mid-Rise Design: Optimizing Size, Maximizing Value – Ethan Martin, WoodWorks

Tall Mass Timber in the Midwest: Designing Two of the Country’s Tallest Wood Projects

February 11, 2020 | Minneapolis, MN

• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Archie Landreman, Woodworks
• Designing Tall Timber for Code Compliance: Fire Resistance, Acoustics and Connection Detailing – Ricky McLain, PE, SE, WoodWorks
• Tall Mass Timber in the Midwest: Designing Two of the Country’s Tallest Wood Projects – Dan Whalen, Harbor Bay Real Estate Advisors
• TMBR | Pushing the Boundaries of Mass Timber Construction – Colin Oglesbay, D/O Architects

Mass Timber Construction Management: Design through Project Close Out

February 5, 2020 | Atlanta, GA

• Sustainability of North American Wood Products –Tiffanie Starr Forest Landowners Association
• Mass Timber Overview – Bruce Lindsey, WoodWorks
• Structural Mass Timber Design: The Engineer’s Role in Optimization – Greg Kingsley, PhD, KL&A Engineers and Builders
• Risk Management – Brendan Kelly & Graham Montgomery, PE, Swinerton
• Site Planning – Brad Nile, AIA, Andersen Construction
• Making the Case & Keeping Costs in Check – Melissa Kroskey, WoodWorks
• Design Engagement: Building the Team and Managing the Design – Brad Nile, Andersen Construction

February 4-part webinar series on the analysis of open-front or corridor-only shear wall diaphragm

February 4, 6, 11 and 13, 2020 | National Online Webinar

• Cantilever Diaphragms: Code Requirements and Relative Stiffness Issues – Terry Malone, WoodWorks
• Shear Wall Design in Cantilever Diaphragm Structures – Terry Malone, WoodWorks
• Cantilever Diaphragm Design, Flexibility Check, and Drift Calculations – Terry Malone, WoodWorks
• Torsional Irregularity and Design Example Checks of an Open Front Building – Terry Malone, WoodWorks

Structural Engineering of Wood Over Podium Structures

January 8, 2020 | National Online Webinar

• Structural Engineering of Wood Over Podium Structures – Ashley Cagle, GLR Engineers

Mass Timber Construction Management + the Future of Tall Wood

December 12, 2019 | Elk Grove, IL

• New Tall Wood Code Provisions: Understanding Advanced Design Topics
• Exploring Tall Wood: New Code Provisions for Tall Timber Structures
• Mass Timber Construction Management: Economics, Logistics & Risk Analysis

Mass Timber Construction Management: Design through Project Close Out

December 11, 2019 | Falls Church, VA

• Design Engagement: Building the Team and Managing the Design – Randall Walter, AIA, R.A., Bensonwood
• Structural Mass Timber Design: The Engineer’s Role in Optimization – Greg Kingsley, PhD, PE, KL&A Engineers and Builders
• Risk Analysis – Erica Spiritos, Swinerton Builders & Graham Montgomery, PE Swinerton
• Schedule Management – Erica Spiritos, Swinerton Builders & Graham Montgomery, PE Swinerton
• Mass Timber Overview: Systems, Products & Codes – Terry Pattillo, AIA, WoodWorks
• Optimizing the Cost of Mass Timber Buildings: Pre-Design through CDs – Ricky McLain, PE, SE, WoodWorks
• Sustainability of North American Wood Products  –Melinda Gable, Forest Landowners Association
• Site Planning: Logistics, Safety, Coordination & Planning – Brad Nile, Andersen Construction Co Inc.

Structural Passive House at the Jobsite: Cost, Inspections, and the Designer-Builder Relationship

December 11, 2019 | National Online Webinar

• Passive House at the Jobsite: Cost, Inspections, and the Designer-Builder Relationship – Ryan Sylvia, Allied Cook Construction

A Design Example of a Wood Cantilever Diaphragm

December 5, 2019 | Scottsdale, AZ | December 3, 2019 | Missoula, MT

• A Design Example of a Wood Cantilever Diaphragm – Terry Malone, WoodWorks

Mass Timber Construction: Products, Performance and Design

December 4, 2019 | Durham, NC

• Mass Timber Construction: Products, Performance and Design – Bruce Lindsey, WoodWorks

A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps

December 4, 2019 | Oakland, CA | December 3, 2019 | Sacramento, CA

• New Tall Wood Code Provisions: Understanding Advanced Design Topics – Janelle Leafblad, WoodWorks
• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Janelle Leafblad, WoodWorks

Taking the Guesswork out of Mixed-Use Building Analysis

December 3, 2019 | Raleigh, NC

• Taking the Guesswork out of Mixed-Use Building Analysis – Bruce Lindsey, WoodWorks

Is Wood-Frame Modular the Future of Multi-Family Construction?

November 20 & 21, 2019 | National Online Event

• Modular Wood-Frame for Multi-Family: Design, Details & Why it Makes Sense – Matthew Laase Jackson|Main Architecture
• Structural Design of Modular Construction Demystified – Aaron Miller, DCI Engineers
• Building Enclosure Design for Modular Construction – Joseph P. Piñon, MS, PE, RDH Building Science

Type III Fire-Resistant Design + New Tall Wood Code Provisions

November 19 & 20, 2019 | Portland, OR & Seattle, WA

• Type III Fire-Resistant Design and Detailing: Exterior Walls, Intersections and Balconies – Ethan Martin, WoodWorks
• New Tall Wood Code Provisions: Understanding Advanced Design Topics – Ethan Martin, WoodWorks

Larger Wood Structures: Practical Design Concepts for Mid-Rise + CLT

November, 2019 | Multiple Locations

• Larger Wood Structures: Practical Design Concepts for Mid-Rise + CLT– WoodWorks Regional Directors

Integrating Passive House Concepts into Everyday Enclosure Design

November 13, 2019 | Cincinnati, OH

• Integrating Passive House Concepts into Everyday Enclosure Design– Dan Whitmore, RDH Building Science Inc.

Southern California Wood Design Symposium

November 13, 2019 | Long Beach, CA

• Progressive Wood Construction: The Evolution from Low-Rise to Tall Wood – Mike Romanowski, WoodWorks
• CLT in the US: Manufacturing and Applications – D.R. Johnson
• A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps – Ricky McLain, WoodWorks and Dennis Richardson, American Wood Council
• Mass Timber Structural Design Considerations – Matt Timmers, John A. Martin & Associates, Inc.
• Timber Offices: Two Case Studies of Form, Function, and Sustainability – Marshall Andrews, DPR Consultants and Steve Guest, RMW Architecture & Interiors
• Advancements in Force Transfer around Openings for Wood-Framed Shear Walls – Karyn Beebe, APA
• 1430 Q: Engineering the First 6-over-2 Podium Building in the US – Ryan Miller, Buehler Engineering
• Is Wood-Frame Modular the Future of Multi-Family Construction? – Matthew Laase, Jackson|Main Architecture
• Code-Compliant Fire-Resistance Design for Wood Construction – Dennis Richardson, American Wood Council
• Innovative Building Solutions: Exceeding Objectives in Multi-Family Construction – LP Building Solutions
• Framing Techniques for Builders: Lessons Learned and Best Practices – Weyerhaeuser
• Mass Plywood Panels: Designing with the Newest Mass Timber Structural Product – Freres Lumber Co.
• Mid-Rise Engineering Considerations for Engineered Wood Products  – Boise Cascade
• Why Timber is Changing the Way We Design and Build – Dean Lewis, DCI Engineers, Ankit Sanghvi, PCL Construction Services, Inc. and Matthew Laase, Jackson|Main Architecture

A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps

November 12, 2019 | Fort Worth, TX

•  New Tall Wood Code Provisions: Understanding Advanced Design Topics – Mark Bartlett, WoodWorks
•  Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Mark Bartlett, WoodWorks

Mass Timber Construction Management: Design through Project Close Out

November 7, 2019 | Seattle, WA

• Mass Timber Overview: Systems, Products & Codes – Ethan Martin, PE
• Sustainability of North American Wood Products – Melinda Gable
• Risk Analysis – Swinerton Mass Timber
• Schedule Management – Swinerton Mass Timber
• Structural Mass Timber Design: The Engineer’s Role in Optimization – Greg Kingsley, PhD, PE
• Design Engagement: Building the Team and Managing the Design – Brad Nile, AIA
• Site Planning: Logistics, Safety, Coordination & Planning – Brad Nile, AIA
• Optimizing the Cost of Mass Timber Buildings – Melissa Kroskey, AIA, SE

Mid-Rise and Taller Wood Buildings: The Growing Landscape

November 5&6, 2019 | Hamilton & Jersey City, NJ

•  Mid-Rise and Taller Wood Buildings: The Growing Landscape – Terry Pattillo, WoodWorks

Northeast Wood Design Symposium

October 16, 2019 | Portland, ME

• Progressive Wood Construction: The Evolution from Low-Rise to Tall Wood – Marc Rivard, PE, SE, WoodWorks
• Hybrid Mass Timber + Steel at the Rhode Island School of Design Residence Hall – David J Odeh, Odeh Engineers
• A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps – Ricky McLain, PE, SE, WoodWorks
• Structural Design of Mass Timber Framing Systems – Paul B. Becker, PE, SECB, Thornton Tomasetti
• UMass Design Building: A Firsthand Account from Design through Owner Occupancy – Tom S Chung AIA LEED BD+C, Leers Weinzapfel Associates
• Advanced Detailing Techniques for Building Enclosures – Colin Shane, PE, MEng, PEng, RDH Building Science Inc.
• Achieving AAA in Passive House Multi-Family: Approachable, Achievable, Affordable – Todd Rothstein, Avesta Housing, Michal Kaleta, Lassel Architects and Ryan Sylvia, PE, AlliedCook Construction
• Code-Compliant Fire-Resistance Design for Wood Construction – Matthew M. Hunter, BCO, American Wood Council
• Designing with Glulam and Timber: The Art of Engineering Really Cool Structures – Jim DeStefano, P.E., AIA, F.SEI, DeStefano & Chamberlain Inc.
• Ushering in the Timber Age: Economic & Sustainable Opportunities for the 21st Century – Frank Lowenstein, New England Forestry Foundation
• Design—Build Information Management: Leveraging Data, Printing Buildings – Randall Walter, AIA, Bensonwood
• Western Red Cedar: Distinctive, Sustainable Design – Western Red Cedar Lumber Association
• Integrated Air & Water Barrier Systems – Georgia-Pacific
• A Mass Timber Breakthrough? Aligning the Pieces for Timber Construction in the Northeast – Noel Johnson, Cairn Pacific, Matt Tonello, Consigli Construction, Dan Burne, PE, Thornton Tomasetti, Naomi Beal, passivhausMAINE, Scott Barton-Smith, AIA, LEED AP BD+C, Hacker Architects

The Evolution of Mid-rise: New Opportunities + Key Design Considerations

October 15, 2019 | Colorado Springs, CO

• The Evolution of Mid-Rise Design: Increasing Opportunities with Wood – David Hanley, WoodWorks
• Accommodating Shrinkage in Multi-Store Wood-Frame Structures – David Hanley, WoodWorks

A Design Example of a Wood Cantilever Diaphragm

October 9 & 10, 2019 | Dallas & Houston, TX

• A Design Example of a Wood Cantilever – Terry Malone & Scott Breneman, WoodWorks

Achieving the Imperative of High-Performance Multi-Family Housing with Wood Construction

October 9, 2019 | National Online Webinar

• Achieving the Imperative of High-Performance Multi-Family Housing with Wood Construction – Timothy McDonald, Onion Flats

Larger Wood Structures: Practical Design Concepts for Mid-Rise and CLT

September 24 & October 1, 2019 | Springfield, MA & Albany, NY

• Larger Wood Structures: Practical Design Concepts for Mid-Rise and CLT – Marc Rivard, WoodWorks

Mass Timber Building Design: NLT + Tall Wood Code Provisions

September 19, 2019 | East Lansing, MI

• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Archie Landreman, WoodWorks
• Nail-Laminated Timber: Compelling Architecture with Modern Timber Design – Archie Landreman, WoodWorks

Mid-Atlantic Wood Design Symposium

September 19, 2019 | Philadelphia, PA

• Progressive Wood Construction: The Evolution from Low-Rise to Tall Wood – Terry Pattillo, AIA, WoodWorks
• Thinking Inside the Box: Modular Construction Demystified – Kendra Halliwell, AIA, LEED AP, ICON Architecture, and Owen Huisenga, Tocci Building Corporation
• Mass Timber Connections: Building Structural Design Skills – Duncan Bourke, PEng, BSc, ASPECT Structural Engineers
• Mid-Rise Design: Optimizing Size, Detailing for Fire & Life Safety – Lori Koch, PE, American Wood Council, and Scott Breneman, PhD, PE, SE, WoodWorks
• Shaft Wall Solutions for Wood-Frame Structures – Ricky McLain, PE, SE, WoodWorks
• A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps – Lori Koch, PE, American Wood Council, and Ricky McLain, PE, SE, WoodWorks 
• Enclosure Design for Mass Timber Buildings – Colin Shane PE, RDH Building Science Inc.
• Correcting Misperceptions of CLT Fire Performance – David Barber, Arup
• Mass Timber Structural Design: Engineering Modern Timber Structures – Scott Breneman, PhD, PE, SE, WoodWorks
• Advancements in Force Transfer around Openings for Wood-Framed Shear Walls – Robert (Bob) Kuserk, PE, APA
• Framing Techniques for Builders: Lessons Learned and Best Practices – Weyerhaeuser
• Using Timber for the Complex and Conventional – StructureCraft (not available)
• Integrated Air & Water Barrier Systems – Georgia-Pacific
• Why Timber is Changing the Way We Design and Build – Katie Rothenberg, HITT Contracting and Randall Walter, AIA, Bensonwood

Mid-Rise and Taller Wood Buildings: The Growing Landscape

September 11 & 12, 2019 | Washington, DC & Baltimore, MD

• Mid-Rise and Taller Wood Buildings: The Growing Landscape – Terry Pattillo, WoodWorks

Seismic Design of a Wood Cantilever, Open-Front Diaphragm

September 10, 11 & 12, 2019 | Seattle, WA, Portland, OR & San Diego, CA

• Seismic Design of a Wood Cantilever, Open-Front Diaphragm – Terry Malone, WoodWorks

Structural Mass Timber Design: The Engineer’s Role in Optimization

September 11, 2019 | National Online Webinar

• Structural Mass Timber Design: The Engineer’s Role in Optimization – Greg Kingsley, KL&A Engineers & Builders

A Design Example of a Wood Cantilever Diaphragm

August 27, 28 & 29, 2019 | Charlotte, NC, Raleigh, NC & Atlanta, GA

• A Design Example of a Wood Cantilever Diaphragm – Terry Malone, WoodWorks

Mass Timber Construction: Products, Performance and Design

August 28, 2019 | S Birmingham, AL

• Mass Timber Construction: Products, Performance and Design – Jeff Peters, WoodWorks

Type III Fire-Resistant Design + Wood in Commercial Buildings

August 20 & 27, 2019 | Boise, ID & Spokane, WA

• Type III Fire-Resistant Design and Detailing: Exterior Walls, Intersections and Balconies – Ethan Martin, WoodWorks
• Opportunities for Wood Use in Low-Rise Commercial Buildings – Ethan Martin, WoodWorks

Mass Timber Building Design: NLT + Tall Wood Code Provisions

August 20, 2019 | Minneapolis, MN

• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Archie Landreman, WoodWorks
• Nail-Laminated Timber: Compelling Architecture with Modern Timber Design – Archie Landreman, WoodWorks

The Evolution of Mid-rise: New Opportunities + Key Design Considerations

August 14 & 15, 2019 | Denver, CO & Fort Collins, CO

• The Evolution of Mid-Rise Design: Increasing Opportunities with Wood – David Hanley, WoodWorks
• Accommodating Shrinkage in Multi-Store Wood-Frame Structures – David Hanley, WoodWorks

Taking the Guesswork out of Mixed-Use Building Analysis

August 14, 2019 | Charlotte, NC

• Taking the Guesswork out of Mixed-Use Building Analysis – Bruce Lindsey, WoodWorks

Mass Timber Connections: Building Structural Design Skills

August 14, 2019 | National Online Webinar

• Mass Timber Connections: Building Structural Design Skills – Bernhard Gafner, ASPECT Structural Engineers

A Design Example of a Wood Cantilever Diaphragm

August 7 & 8, 2019 | Austin, TX & San Antonio, TX

• A Design Example of a Wood Cantilever Diaphragm – Terry Malone, WoodWorks

Taking the Guesswork out of Mixed-Use Building Analysis

July 24 & August 7, 2019 | Albuquerque, NM & Pasadena, CA

• Taking the Guesswork out of Mixed-Use Building Analysis – Mike Romanowski, WoodWorks

Timber-Concrete Composite Floor Technology: Research, Design and Implementation

July 10, 2019 | National Online Webinar

• Timber-Concrete Composite Floor Technology: Research, Design and Implementation – Peggi Clouston, University of Massachusetts

Mass Timber Construction: Products, Performance and Design

June 25 & 27, 2019 | Dearborn, MI & Kalamazoo, MI

• Mass Timber Construction: Products, Performance and Design – Archie Landreman, WoodWorks

Northwest Wood Design Symposium

June 19, 2019 | Seattle, WA

• Microsoft’s Sustainable Campus Re-Fresh: Highlighting Mass Timber’s Role – Lucas Joppa, Microsoft & Ethan Martin, WoodWorks
• Is Wood-Frame Modular the Future of Multi-Family Construction? – John A. Morefield, JACKSON | MAIN Architecture
• Code-Compliant Fire-Resistance Design for Wood Construction – Dennis Richardson, American Wood Council
• Energy Code Compliance: Wood-Frame Buildings and Updates to the 2018 Seattle Energy Code – Michael Aoki-Kramer, RDH Building Science Inc.
• New Code Allowances for Six-Story Wood Construction in Seattle – Ardel Jala, Cheryl Burwell, and Samir Mokashi, Principal, Code Unlimited
• A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps – Dennis Richardson, American Wood Council and Ricky McLain, WoodWorks
• Acoustics and Vibration in Mass Timber Structures: Design & Performance – Ricky McLain, WoodWorks and Scott Breneman, WoodWorks
• Building with Mass Timber: Insights on Preconstruction, Costing and Collaborative Design – Christopher Evans, Swinerton Builders; Erica Spiritos, Swinerton Builders; Dave Walsh, Sellen Construction
• Integrating Mass Timber Elements into Hybrid Structures – Ted Panton, GGLO, Tim Whitcombe, RIBA, NBBJ, Marty Brennan, ZGF Architects and Amie Sullivan, KPFF Consulting Engineers
• Advancements in Force Transfer around Openings for Wood-Framed Shear Walls – Karyn Beebe – The Engineered Wood Association
• Mid-Rise Engineering Considerations for Engineered Wood Products – Boise Cascade
• Structural Solutions: Cross-Laminated Timber for Lateral Resistance – Chris Duvall,, Coughlin Porter Lundeen, Scott Breneman, PhD, PE, SE, WoodWorks and Alex Legé, PCS Structural Solutions
• Enclosure Design for Mass Timber Buildings – Colin Shane, RDH Building Science Inc.
• CLT in the US: Manufacturing and Applications – D.R. Johnson
• Western Red Cedar: Distinctive, Sustainable Design – Western Red Cedar Lumber Association
• Innovative Building Solutions: Exceeding Objectives in Multi-Family Construction – LP Building Solutions
• Mass Plywood Panels: Designing with the Newest Mass Timber Structural Product – Freres Lumber Co
• Pioneering Tall Wood Code Changes: Seattle, Washington and Beyond – Jon Siu, City of Seattle, Matt Ojala, Forterra, and Chris Duvall, Coughlin Porter Lundeen

Maximizing Mid-Rise Value with Wood: Design Tips for Podiums, Sloped Sites and Other Complexities

June 12, 2019 | National Online Webinar

• Maximizing Mid-Rise Value with Wood: Design Tips for Podiums, Sloped Sites and Other Complexities – James Ierardi, AKF Group

Breaking Convention with Timber Offices and Tall Wood

June 11, 2019 | San Antonio, TX

• Breaking Convention with Timber Offices – Sherry Mundell, WoodWorks
• Exploring Tall Wood: New Code Provisions for Tall Timber Structures – Sherry Mundell, WoodWorks

Correcting Misperceptions of Mass Timber Fire Performance

June 11, 2019 | New York, NY

• Breaking Convention with Timber Offices – Marc Rivard, WoodWorks

Navigating Construction Types, Mixed-Use Buildings and Fire-Resistant Design

May 28, 29 & 30, 2019 | Cincinnati, OH, Columbus, OH, Cleveland, OH

• Taking the Guesswork out of Mixed-Use Building Analysis – Anthony Harvey, WoodWorks
• Fire-Resistant Design and Detailing: Firewalls, Fire Barriers and Fire Partitions – Anthony Harvey, WoodWorks

Larger Wood Structures: Practical Design Concepts for Mid-Rise and CLT

May 21 & 28, 2019 | Concord, MA & Worcester, MA

• Larger Wood Structures: Practical Design Concepts for Mid-Rise and CLT – Marc Rivard, WoodWorks

Taking the Guesswork out of Mixed-Use Building Analysis

May 28, 2019 | San Diego, CA

• Taking the Guesswork out of Mixed-Use Building Analysis – Mike Romanowski, WoodWorks

Durability, Termites and Moisture Control: Florida Building Enclosure Design

May 21, 22 & 23, 2019 | Tampa, FL, Winter Park, FL & Jacksonville, FL

• Florida Building Enclosure Design Part I – Colin Shane, RDH Building Science Inc.
• Florida Building Enclosure Design Part II – Colin Shane, RDH Building Science Inc.
• Termite Prevention and Control by Design in Florida – Faith M. Oi, University of Florida

A Design Example of a Wood Cantilever Diaphragm

May 22, 2019 | Oak Brook, IL

• A Design Example of a Wood Cantilever Diaphragm – Terry Malone, WoodWorks

Colorado Wood Solutions Fair

May 16, 2019 | Denver, CO

• Progressive Wood Construction:  The Evolution from Low-Rise to Tall Wood – Dean Lewis, DCI Engineers
• Mile High View: A Colorado Perspective on the Mass Timber Movement – Joseph Anastasi, BD+C, OZ Architecture
• A New Path Forward for Tall Wood Construction: Code Provisions and Design Steps – John “Buddy” Showalter, American Wood Council and Scott Breneman, WoodWorks
• Knock on Wood: Acoustical Solutions in Mass Timber Structures – Denis Blount, ARUP
• Structural Mass Timber Design: The Engineer’s Role in Optimization – Gregory R. Kingsley, KL&A Structural Engineers and Builders
• Wood-Frame Shear Wall and Diaphragm Design – Tim Strasser, WoodWorks
• Factory Built Hotels: Is Wood-Frame Modular the Future of Multi-Family Construction? – Bruce Greenfield, Architects Orange
• Urban Solutions for a Global Carbon Challenge: Timber City – Alan Organschi, Gray Organschi Architecture
• Code-Compliant Fire-Resistance Design for Wood Construction – John “Buddy” Showalter, American Wood Council
• Meeting Fire Code with Oriented Strand Board – LP Building Solutions
• Mass Plywood Panels: Designing with the Newest Mass Timber Structural Product – Freres Lumber Co.
• Mid-Rise Engineering Considerations for Engineered Wood Products – Boise Cascade
• CLT in the US: Manufacturing and Applications – DR Johnson
• Cost Dialogues: The Contractor Perspective on Mass Timber Buildings – Ankit Sanghvi, PCL Construction Services, Christopher Evans, Swinerton Builders, Shawn Brannon, Adolfson & Peterson Construction