Need Project Support?
|
M
Mon
|
T
Tue
|
W
Wed
|
T
Thu
|
F
Fri
|
S
Sat
|
S
Sun
|
|---|---|---|---|---|---|---|
|
0 events,
|
2 events,
-
April 29, 2025 - Regional In-Person Event (Denver, CO) This presentation will walk through early project decisions and design steps, focusing on how to optimize projects for mass timber and how one early decision can influence others. Following a brief discussion of history and motivators, this presentation will introduce the new tall wood code provisions and construction types, as well as the technical research and testing that supported their adoption.
-
Regional In-Person Tour (Charlotte, NC) Join WoodWorks for a first-hand look at the Oxbow project, a seven-story, 423,000 sqft mass-timber mixed-use building featuring below-grade parking, 389 apartments and 13,803 sqft of retail space. |
0 events,
|
1 event,
-
May 1, 2025 - Regional Online Event (CO, MT, NE, ND, SD, WY) This presentation will walk through early project decisions and design steps, focusing on how to optimize projects for mass timber and how one early decision can influence others. Following a brief discussion of history and motivators, this presentation will introduce the new tall wood code provisions and construction types, as well as the technical research and testing that supported their adoption. |
0 events,
|
0 events,
|
0 events,
|
|
0 events,
|
0 events,
|
2 events,
-
Regional In-Person Event (Philadelphia, PA) This presentation will cover some of the design considerations associated with mid-rise wood-frame buildings and will also focus on mid-rise mass timber construction. The presentation will also cover decisions that need to be made early in the design process, including grid layout, approach to achieving fire ratings, and lateral system selection.
-
May 7, 2025 - National Online Event. This educational session will focus on the unique design requirements of Type III construction related to required fire resistance and practical constructability for code compliance. Topics will include fire-resistance-rating requirements for the interior and exterior, the impact of fire separation distance, implications of intersecting fire walls, and primary structural frame protection within exterior walls. |
0 events,
|
1 event,
-
Regional Online Event (PA & NJ) This presentation will cover some of the design considerations associated with mid-rise wood-frame buildings and will also focus on mid-rise mass timber construction. The presentation will also cover decisions that need to be made early in the design process, including grid layout, approach to achieving fire ratings, and lateral system selection. |
0 events,
|
0 events,
|
|
0 events,
|
0 events,
|
0 events,
|
1 event,
-
May 15, 2025 - Regional In-Person Event (Sandy Springs, GA) This presentation will review the tall wood code provisions, including the three new construction types (IV-A, IV-B, and IV-C), and the technical research and testing that supported their adoption. The session will also cover critical aspects of design and construction unique to tall wood buildings, ranging from sprinkler requirements and shaft wall considerations to fire design for penetrations and acoustics performance. |
0 events,
|
0 events,
|
0 events,
|
|
0 events,
|
2 events,
-
May 20, 2025 - Regional In-Person & Online Event (Charlotte, NC) This presentation will review the allowable construction types, with an emphasis on the opportunities and advantages of using light-frame wood in Types III and V. Presenters will cover design considerations associated with these projects, including how to maximize height and area through the use of sprinklers, open frontage, sloping sites, podiums, and mezzanines.
-
May 20, 2025 - Regional Online Event (GA, AL, LA, MS, FL) This presentation will review the tall wood code provisions, including the three new construction types (IV-A, IV-B, and IV-C), and the technical research and testing that supported their adoption. The session will also cover critical aspects of design and construction unique to tall wood buildings, ranging from sprinkler requirements and shaft wall considerations to fire design for penetrations and acoustics performance. |
1 event,
-
May 21, 2025 - National Online Event. This presentation will introduce new provisions for CLT shear wall and diaphragm design, in the American Wood Council’s 2021 Special Design Provisions for Wind and Seismic (SDPWS). |
0 events,
|
0 events,
|
0 events,
|
0 events,
|
|
0 events,
|
0 events,
|
0 events,
|
1 event,
-
May 29, 2025 - Regional In-Person Tour (Seattle, WA) Join us for an in-depth look at this three-story, 87,000-sft school building. The project's design incorporated feedback from the Alki community to meet their specific needs and educational standards. Attendees will tour the site with members of the project team, who will share strategies for successful, code-compliant mass timber projects. |
0 events,
|
0 events,
|
0 events,
|