Skip to content
Home > CAD & Revit - Mass Timber > Panel Bears with Buckets
07 - Panel Bears with Buckets

Panel Bears with Buckets

Panel bears on intermittent buckets. Panel is positively connected to bucket using partially threaded screws. Bucket is positively connected to concrete using post-installed anchors. Grout is provided below bucket for elevation control.

Purpose: Transfer of vertical load from panel to concrete. Can also transfer in-plane and out-of-plane loads from the panel to concrete.

Design Notes

  • Capacity of connection is dependent on parallel-to-grain capacity of panel bearing on buckets.
  • Screws, anchors, and bucket provide load path for in-plane and out-of-plane loads.
  • Spacing of connection as required for stability and loading requirements.
  • Connection may be installed without grout. Without grout, the connection does not accommodate likely variations in top of concrete elevations, even within the range of appropriate concrete tolerances.
Class
Class 2
Load
Load Low
Cost
Cost $$$
Const.
Constructability Moderate
Fire
Fire Rating III

Related Mass Timber

Panel Bears with Buckets

Panel bears on intermittent buckets. Panel is positively connected to bucket using partially threaded screws. Bucket is positively connected to concrete using post-installed anchors. Grout is provided below bucket for elevation control.
07 - Panel Bears with Buckets

Fill out the form below to begin your download.

"*" indicates required fields

Name*
Address*

By submitting this form, you agree to our terms & privacy policy.