Upcoming Events

Loading Events

« All Events

  • This event has passed.

Structural Design for Wind Loads: An Overview of Engineering Considerations for Wood Buildings

December 7, 2016 – 8:30 am - 2:15 pm


Austin, TXAustin, TX


Onsite check-in:  8:00 am
Program begins:  8:30 am
Program concludes: 2:15 pm

Course Description

This course is intended for structural engineers and building designers seeking an overview of design steps, considerations and detailing best practices related to the wind-resistive design and analysis of non-residential and multi-family wood buildings. Developed in response to the fact that engineering curricula does not typically include a wood design course, it provides an overview of relevant 2012 International Building Code (IBC) provisions and American Wood Council (AWC)-referenced standards, a discussion of common design errors, and guidance related to load path continuity, shear walls, diaphragms, and uplift restraint. Topics covered in detail include:

  • 2012 IBC and AWC-referenced standards applicable to wood-frame wind-resisting systems
  • Uplift-resistant design solutions, including combined shear and uplift
  • Out-of-plane wall design for wind loads, including tall walls, gable end walls, and tall walls with large openings, as well as deflection criteria for a variety of wall finishes
  • Design and stiffness assumptions for rigid, semi-rigid and flexible diaphragms
  • Diaphragm deflection and design of components such as chords and collectors
  • Shear wall design methods, including segmented, perforated and force transfer around openings
  • Design of shear wall components, including holdowns and drag struts
  • Multi-story wood-frame design example for high winds, including accommodation of accumulated forces and deflections as well as design and detailing for wood’s interface with concrete podiums and foundations

Attendees can expect a top-to-bottom discussion of all aspects of wood-frame wind-resisting systems.

Content Rating: 1 (low) to 5 (high)

Content Rating E3 A1_580x28


Lori Koch, P.E., American Wood Council

Lori is a Project Engineer with the American Wood Council, where she assists in the development of codes and standards, answers helpdesk inquiries, provides outreach and education, and generally promotes the use of wood in safe and sustainable buildings. After earning a BS in Civil Engineering from Penn State University and an MS in Civil Engineering from Clemson University, Lori worked as a forensic structural engineer with SK&A in Washington, DC. She then enrolled at Virginia Tech, where she earned a Master of Forestry degree in the Department of Wood Science and Forest Products (now the Department of Sustainable Biomaterials). She is a licensed Professional Engineer in

Robbie Kelley, WoodWorks

Robbie received his Bachelor’s Degree in Agriculture Business from Sam Houston State University. Prior to joining WoodWorks, he had spent the majority of his professional career as regional manager for two of the largest wood window manufacturers in the U.S.

Ricky McLain, P.E., S.E., WoodWorks

Ricky is a licensed Structural Engineer and Professional Engineer in the states of New York, Massachusetts, New Hampshire and Vermont, and is a Technical Director of Architectural and Engineering Solutions for the WoodWorks program. He has extensive experience in lead engineer roles related to the structural design, project management and construction administration of new single-family, multi-family, municipal, industrial, and mixed-used buildings. Before joining WoodWorks, Ricky was a Senior Structural Engineer for a New England-based consultant, working on projects in the Northeast from Maine to Maryland. He is Executive Director of the Structural Engineers Association of Vermont and is a member of the ASCE Structural Wind Engineering Committee. Ricky received a BS in Civil Engineering from the University of Maine and an MS in Structural Engineering from Norwich University.

Maggiano’s Little Italy
The Domain
10910 Domain Dr
Austin, TX 78758
(512) 501-7870

Free parking

Map & Directions

You can find the presentations in our Presentation Slides Archive page.

Attendees will qualify for 4 AIA/CES LUs (HSW) or PDH credits.

Professional Development Certificates and AIA CES forms will be available on site.


For questions or additional information please contact Dawn Veach at  or 404.394.4197.


7 December 2016
8:30 am - 2:15 pm
Event Category:


Maggianos Little Italy – Austin
Austin, TX United States

WoodWorks offers a wide range of in-person and online training opportunities, from Wood Design Symposiums that include concurrent seminars and a trade show, to half-day workshops, lunchtime seminars and webinars.