 |
|
Presentations Archive |
|
San Francisco Wood Solutions Fair
September 30, 2008
2007 Wood Design Awards – Showing Inspiration in Wood
Marianne Berube, Executive Director, Ontario Wood WORKS!
A Practical Guide to Life Cycle Assessment
Wayne Trusty, President, Athena Sustainable Materials Institute
Case Study: Environmental Learning Center
Roger B. Williams, FAIA, JIA, LEED AP, Roger Williams Architect
Connection Solutions for Wood Framed Structures
Karyn Beebe, P.E., APA – The Engineered Wood Association
Fire Protection in Non-residential Structures
Scott Lockyear, P.E., WoodWorks Southeast
Green Building Initiative - Green Globes
Mark Rossolo – Green Building Initiative
Incorporating Wood Trusses into Overall Building Design
Norman Scheel, P.E., S.E., SECB, F.SEAOC, F.ASCE
Innovative Use of Glulam in the Oakland Cathedral
Paul Gilham, P.E., S.E., Western Wood Structures, Inc.
Introduction to Post-frame Construction, Buildings and Design (Part 1 of 2)
Post-frame Building Design Resources and Design Methods (Part 2 of 2)
Dr. Harvey Manbeck, P.E., Professor Emeritus of Agricultural Engineering, Penn State University
LRFD – Load and Resistance Factor Design
Lisa Podesto, P.E., WoodWorks California
New Tools for Engineering Large Wood Diaphragms
John Lawson, S.E., Kramer and Lawson, Inc.
Pressure-treated Wood – Technical Characteristics and Related Building Applications
Jerry Parks, Director of Marketing Services, Western Wood Preservers Institute
Seismic and Wind Design Considerations for Wood Framed Structures
Michelle Kam-Biron, P.E., S.E., WoodWorks California
US Green Building Council - LEED
Jason Grant |
|
|
|
|
Disclaimer
Presentations on the WoodWorks website are offered as part of our educational program. While the information is believed to be correct, neither WoodWorks nor the authors make any warranty, expressed or implied, or assume any legal liability or responsibility for the use, application of, and/or reference to opinions, findings, conclusions, or recommendations included. The information should not be used for any specific application without competent examination and verification of its accuracy, suitability, and applicability by qualified professionals. Users assume all liability arising from such use. |
|
|
 |